Logo
Get Estimate

Mold Inspection Boise ID: Find Hidden Mold Before It Spreads

Licensed inspectors, moisture detection, and lab-backed results for Idaho homes


If you have smelled that musty odor, seen dark staining on drywall, or dealt with a roof leak or crawl space dampness, a professional mold inspection Boise ID is the fastest way to find out what is actually growing and how far it has spread. We serve homeowners, renters, and property managers across Ada County with mold assessment Boise Idaho that combines moisture detection, air sampling, and a written report you can hand to a contractor, buyer, or insurance adjuster.

A construction worker in a hard hat inspects a floor vent indoors, ensuring quality and safety standards.
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed Workmanship Guaranteed in Boise

What Our Mold Inspection Includes

Every mold inspection Boise ID includes a comprehensive visual survey, moisture detection, and a written report. Air and surface sampling is included when conditions warrant. Here is what you get.

Visual Inspection

Room-by-room survey of all accessible areas including basements, crawl spaces, attics, bathrooms, kitchens, and HVAC closets. We look for visible growth, water staining, and conditions that support mold.

Moisture Detection

Moisture meter and thermal imaging camera readings in suspect areas. We map moisture behind walls and under floors without cutting. You get a clear picture of where water is hiding.

Air Sampling

Air sampling pump with spore trap cassette or Air-O-Cell slide to capture airborne spores. Samples are sent to a certified lab for genus-level identification and spore counts.

Surface Sampling

Swabs and tape lifts from visible growth for lab identification. This confirms whether the growth is mold, what species, and whether it is toxigenic.

Written Report

Detailed report with photos, moisture readings, lab results, floor plan sketch, and recommended next steps. Delivered within 72 hours. Includes a phone debrief to walk you through findings.

What a Mold Inspection Boise ID Actually Covers


A mold inspection Boise ID is a non-invasive, room-by-room evaluation of your home or building to locate active mold growth, hidden moisture, and the conditions that feed it. We use a moisture meter, thermal imaging camera, and borescope camera to check behind baseboards, inside wall cavities, under sinks, and in crawl spaces and attics where mold usually hides. We also collect air samples with a spore trap cassette and Air-O-Cell slides, plus surface samples with swabs and tape lifts, then send them to a certified lab for analysis. You get a clear written report with photos, lab results, and recommended next steps.

Boise homes deal with a specific set of moisture problems. Winter snowmelt and spring rain push water against foundations in the North End and Boise Bench. Crawl spaces in older homes around Depot Bench and Vista Neighborhood stay damp year-round. Attic mold from roof leaks shows up after heavy snow years. If you have noticed a musty smell or unexplained allergy symptoms, a professional mold assessment near me Boise can tell you whether the problem is active, dormant, or already spreading through the HVAC system. We also handle mold inspection for homeowners Boise Idaho who are buying or selling and need documentation.

Our Mold Inspection Process, Step by Step

Every inspection follows the same disciplined sequence so nothing gets missed. Here is exactly what happens from the moment you call to the day you get your report.

01

Schedule

Call or book online — a real human picks up and confirms a 2-hour arrival window.

02

Diagnose

Licensed tech inspects on-site, then walks you through the cause and your options.

03

Fix

The job is completed to code and done right the first time — no shortcuts, no surprises.

04

Guarantee

Every job backed by a written workmanship warranty — and we stand behind it.

Tools and Methods We Use

Tools & Equipment

Moisture Meter (Protimeter)

Measures moisture content in drywall, wood, and other building materials. Identifies areas of elevated moisture that support mold growth.

Thermal Imaging Camera (Flir)

Detects temperature differentials that indicate hidden moisture behind walls, under floors, and around windows. Non-invasive and fast.

Borescope Camera

Allows us to see inside wall cavities, behind baseboards, and inside HVAC ducts without cutting or drilling.

Air Sampling Pump (SKC)

Draws air through a spore trap cassette or Air-O-Cell slide to capture airborne mold spores for lab analysis.

Hygrometer (Extech)

Measures relative humidity in different areas. High humidity alone can support mold growth even without a leak.

Particle Counter (Dylos)

Measures airborne particulate levels, including mold spores. Provides real-time data on indoor air quality.

Methods & Standards

IICRC S520 Standard

We follow the IICRC S520 standard for mold assessment and remediation scope. This ensures our inspection and reporting meet industry best practices and hold up to insurance and legal scrutiny.

Air Sampling with Spore Trap Cassettes

We use Air-O-Cell and Zefon spore trap cassettes with a calibrated air sampling pump. Samples are sent to an accredited lab for genus-level identification and spore counts.

Surface Sampling with Swabs and Tape Lifts

For visible growth, we use swabs and tape lifts to collect samples. This confirms whether the growth is mold, what species, and whether it is toxigenic.

Moisture Mapping

We combine moisture meter readings with thermal imaging to create a moisture map of the property. This shows where water is present and how far it has spread.

When to Schedule a Mold Inspection

01

You are buying a home in Boise and want to know if there is hidden mold before you close.

What we do: We perform a pre-purchase mold inspection that covers all accessible areas, including crawl spaces and attics. We take air samples and provide a report you can use to negotiate repairs or walk away.

→ You know exactly what you are buying. No surprises after closing.

02

You had a pipe burst or roof leak and want to confirm whether mold has started growing.

What we do: We inspect the affected area with moisture meters and thermal imaging. If conditions are right for mold, we sample and send to the lab. We document everything for your insurance claim.

→ You catch mold early and avoid a much larger remediation bill.

03

You smell something musty but cannot find the source.

What we do: We use a borescope camera and thermal imaging to check behind walls, under floors, and inside HVAC systems. Air sampling confirms whether airborne spores are elevated.

→ You find the source and get a clear plan to fix it.

04

You are a landlord and a tenant has complained about mold.

What we do: We perform an independent inspection and provide a written report that documents conditions, moisture readings, and lab results. The report is neutral and factual, suitable for both parties.

→ You have documentation to resolve the dispute and a scope of work if remediation is needed.

How Mold Inspection Works in Boise

Boise has a semi-arid climate, but that does not mean mold is rare. Winter snowmelt, spring rain, and irrigation systems create moisture challenges. Older homes in the North End and Depot Bench often have crawl spaces that stay damp year-round. Newer construction in Harris Ranch can have tight building envelopes that trap moisture if ventilation is poor. We see attic mold from roof leaks after heavy snow years, basement mold after flooding, and bathroom mold from poor ventilation in homes with original 1950s fans. Our mold assessment Boise Idaho accounts for these local conditions. We know where to look and what to test. If you need a mold inspection near me Boise ID, we are ready to help.

Neighborhoods We Serve

  • North End

    Historic homes with original crawl spaces and foundation drainage issues. High risk for crawl space mold and basement dampness.

  • Boise Bench

    Mid-century ranches with original plumbing and roof systems. We often find slow leaks that have been feeding mold for years.

  • Harris Ranch

    Newer construction with tight envelopes. Poor ventilation can lead to condensation and attic mold.

  • Depot Bench

    Older homes near the river with high water tables. Crawl space mold is common after wet winters.

Local Conditions We Plan For

  • Winter snowmelt and spring rain

    Water pushes against foundations and into crawl spaces. We see a spike in crawl space mold calls from March through May.

  • Dry summers with irrigation

    Irrigation systems can oversaturate soil near foundations, leading to seepage and basement mold.

  • Heavy snow years

    Ice dams and roof leaks lead to attic mold. We inspect roof sheathing and rafters after heavy snow.

Crawl Space Mold in North End Bungalow

Before

A 1920s bungalow had a musty odor in the living room. The crawl space had no vapor barrier and standing water after spring rain. Joists were covered in white and black growth.

After

We documented the mold, took samples, and provided a report. The homeowner installed a vapor barrier and encapsulation. Post-remediation verification showed no elevated spore counts. The musty odor was gone.

Maintenance: Keep the crawl space sealed and run a dehumidifier during wet months. Check annually for new moisture.

Before

After a heavy snow year, a homeowner noticed staining on the ceiling. The attic had mold on roof sheathing and rafters from a slow roof leak. Insulation was damp.

After

We inspected the attic, documented the leak source and mold extent, and provided a report for insurance. The roofer fixed the leak, and a remediation contractor removed affected materials. Clearance testing passed.

Maintenance: Inspect the roof annually and after heavy snow. Fix any leaks immediately to prevent mold.

Before

Tenants complained of allergies and musty smell. The HVAC system had mold on the evaporator coil and in the ductwork. Air samples showed elevated spore counts.

After

We documented the contamination and provided a report. The landlord had the HVAC system cleaned and treated with antimicrobial solutions. Follow-up testing showed normal spore levels.

Maintenance: Change HEPA filters regularly and schedule annual HVAC inspections. Keep humidity below 50%.

Mold Problems We Solve in Boise

Mold shows up in predictable places. Here are the most common problems we find and how we solve them.

Problem

Musty odor with no visible mold

Hidden mold behind drywall or under flooring can spread through the home and cause respiratory issues, allergies, and property damage.

Our Fix

We use a borescope camera and thermal imaging to find hidden growth without demolition. Air sampling confirms whether spores are elevated. You get a clear answer and a plan.

Problem

Crawl space mold after wet winter

Crawl space mold can spread to living areas through the stack effect, degrading indoor air quality and damaging floor joists and insulation.

Our Fix

We inspect the entire crawl space, measure moisture in joists and subfloor, and sample any growth. We recommend encapsulation and drainage fixes to stop recurrence.

Problem

Attic mold from roof leak

Attic mold from roof leaks can rot sheathing and rafters, and spores can enter the home through HVAC returns and ceiling gaps.

Our Fix

We inspect roof sheathing, rafters, and insulation. We document the leak source and mold extent. Your roofer fixes the leak, your remediation contractor handles cleanup, and we verify.

Problem

Mold after water damage or flooding

Mold can begin growing within 24 to 48 hours after water damage. Waiting too long means more square footage affected and higher remediation costs.

Our Fix

We perform a water damage inspection, map moisture, and assess mold risk. If growth is present, we document it for insurance and recommend immediate remediation.

Why Boise Homeowners Book Our Mold Assessment

Why Boise Homeowners Book Our Mold Assessment

A mold problem does not fix itself. The longer you wait, the more square footage it covers and the more expensive the remediation becomes. Here is what you get when you schedule with us.

  • Lab-Backed Results

    We do not guess. Air samples go to a certified lab, and you get a written report identifying the genus and concentration of any spores found. That means you know whether you are dealing with common Cladosporium or black mold (Stachybotrys) before you spend a dollar on remediation.

  • Moisture Source Found

    Mold needs water. Our moisture meter, hygrometer, and thermal imaging camera trace the source, whether it is a slow supply-line leak, a failed window flashing, or groundwater wicking through a crawl space. Fix the moisture and you stop the mold from coming back.

  • Same-Day Scheduling

    We offer same day mold inspection Boise ID for urgent situations like post-flood, burst pipe, or a real estate deadline. Call before noon and we can often be on site the same afternoon. Evening and weekend appointments are available for working homeowners.

  • Report Ready for Anyone

    Our reports are formatted for real-world use: insurance claims, real estate transactions, contractor bids, and landlord-tenant disputes. Photos, moisture readings, lab results, and a clear scope of affected areas. No vague language, no upselling, just the facts you need to make a decision.

Local Experience You Can Verify

Our inspectors hold IICRC WRT and AMRT certifications, ACAC CMI and CMR credentials, and NACHI certified inspector status. We follow IICRC S520 standards for mold assessment and remediation scope. We have inspected crawl spaces, attics, basements, and HVAC systems across Ada County, from 1920s bungalows in the North End to new construction in Harris Ranch. We know how Boise building stock ages, where moisture intrudes, and what local code requires for disclosure and remediation. Every inspection is documented to a standard that holds up to insurance scrutiny and real estate negotiation.

  • IICRC WRT and AMRT certified for water damage and mold remediation assessment
  • ACAC CMI and CMR credentials for commercial and residential mold inspection
  • NACHI certified inspector with ongoing training in building science
  • Experienced with Idaho state mold license requirements and disclosure rules
  • Thousands of inspections completed across Ada County and the Treasure Valley
Get Started Today
Local Experience You Can Verify

Frequently Asked Questions About Mold Inspection in Boise

Real answers to the questions we hear most often from local homeowners and property managers.

What does a mold inspection include in Boise ID?
A standard mold inspection in Boise ID includes a visual survey of accessible areas, moisture readings with a meter and thermal camera, and a written report with photos. If we find suspect growth or elevated moisture, we recommend air and surface sampling. Lab analysis adds 24 to 72 hours. The inspection itself takes 45 to 90 minutes for most homes.
How long does a mold assessment take in Boise Idaho?
Most residential mold assessments take 1 to 2 hours on site. Larger homes, crawl spaces, and attics can push it to 3 hours. Lab results come back in 24 to 72 hours, and your full written report follows within a day of receiving those results. We can often schedule same-day or next-day appointments.
How often should I get a mold inspection in Boise ID?
Every 2 to 3 years is reasonable for most homes. You should book sooner if you have had water damage, a roof leak, flooding, or visible growth. If you are buying or selling a home in Ada County, a pre-listing or pre-purchase inspection is smart. Crawl spaces and attics should be checked annually in older homes.
Do you offer free mold inspections in Boise Idaho?
We do not offer free inspections because proper testing involves lab costs and certified inspector time. We do keep pricing affordable and transparent. You will know the cost before we schedule. For homeowners on a budget, we can tailor the scope to focus on the highest-risk areas first.

Related Services

Mold Testing

Mold testing is the lab side of the inspection. We collect air and surface samples during the inspection and send them for analysis. If you need genus-level identification or spore counts for a medical or legal purpose, testing is the next step after a visual inspection.

View Mold Testing

Air Quality Testing

Air quality testing measures airborne particulates, including mold spores, using a particle counter and air sampling pump. It is often paired with a mold inspection when occupants report allergies or respiratory symptoms that worsen indoors.

View Air Quality Testing

Black Mold Inspection

Black mold (Stachybotrys) requires specific conditions: cellulose material, sustained moisture, and slow drying. Our black mold inspection focuses on finding those conditions and sampling any dark growth to confirm whether it is Stachybotrys or a less concerning species.

View Black Mold Inspection

Toxic Mold Testing

Toxic mold testing looks for mycotoxin-producing species like Stachybotrys and Aspergillus. We use specialized sampling and lab analysis to identify whether toxigenic mold is present and at what concentration, which matters for health-sensitive occupants.

View Toxic Mold Testing

Mold Remediation

If mold is confirmed, remediation is the cleanup phase. We do not perform remediation, but we provide the inspection report your remediation contractor needs to scope the job correctly. We can also return for post-remediation verification.

View Mold Remediation

Mold Removal

Mold removal involves physically removing contaminated materials and cleaning affected surfaces. Our inspection identifies what needs removal versus what can be cleaned. We document the scope so your removal contractor knows exactly where to work.

View Mold Removal

Schedule Your Mold Inspection Boise ID Today

If you have seen staining, smelled something musty, or dealt with a leak, do not wait. Mold spreads fast. Call us now to schedule a mold inspection Boise ID. We offer same-day appointments, upfront pricing, and lab-backed results you can trust.

Call Now Book Inspection Now

Contact Boise Mold Testing

Ready to schedule an inspection or have questions about mold testing? Call us at +1 866-896-8166 or email info@boisemoldtesting.com. We answer calls 24/7 for emergencies and schedule same-day appointments whenever possible. Our team serves all of Boise and Ada County, including ZIP codes 83702, 83703, 83704, 83705, 83706, and 83709.

Or call us right now at +18668968166 — we answer.

Boise Mold Testing


  • Phone

    +18668968166
  • Address

    Boise, Idaho

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Call +18668968166 Get Quote
Call Quote