Logo
Get Estimate

Kitchen Mold Inspection Boise ID You Can Count On

We find hidden kitchen mold before it spreads


When you need a kitchen mold inspection Boise ID homeowners trust, we show up with thermal cameras, moisture meters, and lab-grade sampling gear. We check under sinks, behind dishwashers, inside cabinets, and around exhaust vents. If there is mold, we find it, document it, and tell you exactly what to do next. Same-day appointments are available across Ada County.

A real estate agent demonstrates kitchen features in a modern home. Ideal for real estate and lifestyle concepts.
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed Workmanship Guaranteed in Boise

What Is Included in Our Kitchen Mold Inspection

Every kitchen mold inspection Boise ID job includes a full visual assessment, moisture mapping, thermal imaging, and a written report. Sampling is included when we find suspect growth or elevated moisture. Here is exactly what you get.

Full Visual Assessment

We inspect every accessible surface in your kitchen: sink base, dishwasher, refrigerator line, exhaust hood, backsplash, cabinet interiors, and adjacent walls. Cabinet toe kicks and access panels come off where needed. Every suspect area gets photographed and logged.

Moisture Mapping

We use Protimeter and Extech moisture meters to read moisture content in walls, floors, and cabinet materials. Readings are logged by location and compared to dry standard. This tells us where water is hiding and how far it has spread.

Thermal Imaging Scan

A Flir thermal imaging camera reveals temperature differences that indicate hidden moisture behind drywall and under floors. We scan the entire kitchen and any adjacent rooms that share plumbing walls. Anomalies get confirmed with a moisture meter.

Air and Surface Sampling

When we find suspect growth or elevated moisture, we collect air samples with an SKC pump and Air-O-Cell cassette, plus surface samples with swabs or tape lifts. Samples go to an accredited lab for species identification and spore counts.

Written Report with Photos

You get a full report within 24 to 48 hours of sampling. It includes photos, moisture maps, lab results, and a prioritized action list. The report is formatted for insurance claims, real estate transactions, and remediation scopes.

Phone Consultation

After you receive the report, we schedule a 15-minute call to walk you through the findings. We explain what the lab results mean, what needs to be fixed first, and what can wait. No jargon, no pressure, just straight answers.

What a Kitchen Mold Inspection Boise ID Covers


A kitchen mold inspection Boise ID is a room-by-room evaluation that locates active mold growth, hidden moisture, and the conditions feeding it. We start with a visual walkthrough, then use a Protimeter moisture meter and Flir thermal imaging camera to read what your eyes cannot see. Cabinet toe kicks come off. Under-sink areas get checked. We pull the dishwasher forward when the cabinet base shows swelling. Every suspect spot gets documented with photos and moisture readings before we sample.

Kitchens in Boise take a beating. Winter freeze-thaw cycles stress supply lines, and summer irrigation lines can push humidity into slab-on-grade homes on the Bench. We see kitchen mold after dishwasher leaks Boise Idaho homeowners did not catch for weeks, plus slow drips under sinks that soak cabinet bases and drywall. If you have been searching for a kitchen mold inspection near me Boise ID, we cover the whole kitchen, not just the visible spots.

Our Kitchen Mold Inspection Process

We keep it simple. Five steps from the first phone call to a written report you can hand to your contractor, realtor, or insurance adjuster.

01

Schedule

Call or book online — a real human picks up and confirms a 2-hour arrival window.

02

Diagnose

Licensed tech inspects on-site, then walks you through the cause and your options.

03

Fix

The job is completed to code and done right the first time — no shortcuts, no surprises.

04

Guarantee

Every job backed by a written workmanship warranty — and we stand behind it.

Tools and Methods We Use for Kitchen Mold Inspection

Tools & Equipment

Protimeter Moisture Meter

Reads moisture content in drywall, wood, and cabinet materials. We use it to map moisture and confirm whether a suspect area is actively wet or has dried.

Flir Thermal Imaging Camera

Detects temperature differences that indicate hidden moisture behind walls and under floors. It lets us scan large areas quickly and pinpoint where to focus moisture readings.

Borescope Camera

A flexible camera that goes inside wall cavities and cabinet interiors without demolition. We use it to visually confirm mold growth in hidden spaces.

SKC Air Sampling Pump

Draws a calibrated volume of air through a spore trap cassette. We use it to measure airborne mold spore concentrations in the kitchen and adjacent rooms.

Zefon Air-O-Cell Cassette

A spore trap that captures airborne mold spores for lab analysis. It is the industry standard for air sampling and gives species-level results.

Extech Hygrometer

Measures relative humidity and temperature. We use it to check whether kitchen humidity is above the 60 percent threshold that supports mold growth.

Swab and Tape Lift Kits

Used to collect surface samples from visible mold growth. Swabs work on irregular surfaces; tape lifts work on flat surfaces. Both go to the lab for species identification.

Methods & Standards

IICRC S520 Standard

The industry benchmark for mold assessment and remediation. We follow S520 protocols for inspection, sampling, and documentation. That means our reports meet the standard insurance companies and remediation contractors expect.

Thermal Imaging Survey

We scan the entire kitchen and adjacent walls with a Flir camera to find temperature anomalies. Any anomaly gets confirmed with a moisture meter. This method catches hidden moisture that visual inspection misses.

Air Sampling with Outdoor Baseline

We collect indoor air samples and compare them to an outdoor baseline. This tells us whether indoor spore counts are elevated and by how much. It is the most reliable way to confirm a mold problem.

Surface Sampling with Swabs and Tape Lifts

When visible growth is present, we collect surface samples to identify the species. Swabs and tape lifts are non-destructive and give the lab enough material for accurate identification.

Moisture Mapping

We log moisture readings by location and compare them to dry standard. This creates a map of where water is hiding and how far it has spread. It guides remediation and confirms when the area is dry.

When to Book a Kitchen Mold Inspection in Boise

01

You had a dishwasher or supply line leak in the last 30 days and the cabinet still feels damp.

What we do: We inspect the cabinet base, subfloor, and adjacent drywall with a moisture meter and thermal camera. If moisture is still elevated, we collect samples and document the extent. You get a report within 48 hours.

→ You know whether mold has started and what to fix before it spreads. Most homeowners catch it early enough to avoid full cabinet replacement.

02

You are buying or selling a home in Boise and the kitchen has a musty odor or water stains.

What we do: We perform a full kitchen mold assessment Boise Idaho with air and surface sampling. The report is formatted for real estate transactions and includes lab results, photos, and a clear scope of any needed repairs.

→ Buyers and sellers get the facts they need to negotiate. A clean report speeds up closing; a documented problem lets you fix it before it kills the deal.

03

Your kitchen has flooded from a burst pipe, roof leak, or appliance failure.

What we do: We perform an emergency kitchen mold inspection Boise ID with moisture mapping, thermal imaging, and air sampling. We document everything for your insurance claim and give you a scope for remediation.

→ Your insurance claim gets approved faster with a professional report. You know exactly what needs to be dried, removed, or replaced.

04

You smell a musty odor in the kitchen but cannot find the source.

What we do: We use a borescope camera and thermal imaging to inspect wall cavities, cabinet interiors, and under-appliance spaces. If we find growth, we sample it. If we do not, we tell you what else might be causing the odor.

→ You get a definitive answer instead of guessing. If mold is present, you catch it before it spreads. If it is not, you save money on unnecessary remediation.

05

You had mold remediation done and need post-remediation verification for your records.

What we do: We collect air and surface samples, compare them to baseline, and issue a clearance report. The report is formatted for insurance companies, realtors, and future buyers.

→ You have documented proof the job was done right. That clearance report protects your home value and gives you confidence the mold is gone.

How Kitchen Mold Inspection Works in Boise

Boise kitchens face a specific set of moisture challenges. Our freeze-thaw winters stress supply lines and cause pinhole leaks that drip slowly for weeks. Our dry summers pull moisture out of wood, then wet springs push humidity back in, creating expansion and contraction that opens seams around sinks and counters. Homes on the Bench and in South Boise often sit on slab-on-grade foundations where moisture wicks up through the concrete and into cabinet bases. Older homes in the North End and Depot Bench have galvanized plumbing that corrodes from the inside, leading to slow leaks behind walls. Newer builds in Harris Ranch and Southeast Boise are tighter, which means moisture from a leak has nowhere to escape and spreads faster. We adjust our inspection approach based on your neighborhood and home age. If you need a kitchen mold assessment in Boise Idaho, we know what to look for.

Neighborhoods We Serve

  • North End

    Older homes with galvanized plumbing and original cabinet bases. Slow leaks behind walls are common. We pay extra attention to under-sink areas and wall cavities.

  • Boise Bench

    Many slab-on-grade homes where moisture wicks up through concrete. Cabinet bases and toe kicks are prime spots for hidden mold.

  • Harris Ranch

    Newer, tighter construction that traps moisture. A small leak can spread mold faster because there is less airflow. We use thermal imaging to catch it early.

  • Depot Bench

    Mix of older and mid-century homes with original plumbing. We often find mold behind kitchen walls where supply lines have dripped for years.

  • Southeast Boise

    Family homes with heavy kitchen use. Dishwasher and refrigerator line leaks are common. We check appliance connections and cabinet interiors thoroughly.

Local Conditions We Plan For

  • Winter freeze-thaw cycles stress plumbing

    Supply lines and p-traps can crack or loosen, causing slow drips that soak cabinet bases. Mold can start within 48 hours of a leak.

  • Dry summers followed by wet springs

    Wood cabinets expand and contract, opening seams around sinks and counters. Moisture gets in and stays trapped, feeding mold growth.

  • Slab-on-grade foundations common on the Bench

    Moisture wicks up through concrete into cabinet bases. Without a vapor barrier, mold grows on the bottom of cabinets and toe kicks.

  • Tight construction in newer neighborhoods

    Less airflow means moisture from a leak cannot escape. Mold spreads faster and spore counts rise quickly in adjacent rooms.

Under-Sink Mold After Slow P-Trap Leak

Before

A homeowner in the Vista Neighborhood noticed a musty smell but no visible mold. The cabinet base felt soft. A slow p-trap leak had been dripping for weeks, soaking the cabinet floor and the drywall behind it. Moisture readings were above 25 percent.

After

We confirmed mold growth with a borescope camera and collected surface samples. Lab results showed Cladosporium and Penicillium. The homeowner had the cabinet base replaced and the drywall treated. Post-remediation air samples came back at baseline levels.

Maintenance: Check under-sink plumbing every three months for drips. Install a moisture alarm under the sink. Keep cabinet doors open for an hour after heavy kitchen use to let humidity escape.

Before

A dishwasher supply line failed in a Harris Ranch home, soaking the cabinet and subfloor. The homeowner dried the visible water but did not realize moisture had traveled 18 inches up the wall. Two weeks later, a musty odor appeared.

After

Thermal imaging revealed moisture in the wall cavity. We collected air samples and found elevated spore counts. The homeowner filed an insurance claim with our report and had the affected drywall removed and replaced. Clearance testing passed on the first try.

Maintenance: Replace rubber dishwasher supply lines with braided stainless steel every five years. Run the dishwasher only when you are home. Check the cabinet base monthly for swelling or discoloration.

Before

A North End homeowner had mold on the upper cabinets near the stove. The exhaust hood was clogged and venting into the kitchen instead of outside. Humidity stayed above 65 percent for months, feeding mold on cabinet surfaces and behind the backsplash.

After

We documented the mold with surface samples and confirmed the exhaust failure with an airflow test. The homeowner had the duct cleaned and rerouted. Humidity dropped to 45 percent. Follow-up inspection confirmed no new growth after 60 days.

Maintenance: Clean or replace exhaust hood filters every three months. Run the exhaust fan for 10 minutes after cooking. Use a hygrometer to keep kitchen humidity below 60 percent year-round.

Kitchen Mold Problems We Solve in Boise

Kitchen mold shows up in predictable places. Here are the problems we see most often and how we solve them for Boise homeowners.

Problem

Musty smell but no visible mold

A persistent musty odor usually means hidden mold behind drywall or under cabinets. Ignoring it lets spores spread through your HVAC system and into living areas.

Our Fix

We use thermal imaging and a borescope camera to inspect wall cavities and cabinet interiors without demolition. If we find growth, we sample it and document the extent. You get a clear answer and a plan.

Problem

Mold after dishwasher leak Boise Idaho

Dishwasher supply line failures soak cabinet bases and subfloor. Mold can start within 24 to 48 hours. If the cabinet base stays wet, mold spreads into the wall cavity and floor structure.

Our Fix

We map moisture with a Protimeter meter, check the cabinet base and adjacent drywall, and collect samples if growth is present. Our report gives your remediation contractor a precise scope so nothing gets missed.

Problem

Dark spots under the kitchen sink

Under-sink mold is common in Boise homes with slow p-trap drips or failed supply lines. The dark spots are often black mold (Stachybotrys), which produces mycotoxins and can affect indoor air quality.

Our Fix

We inspect the sink base, pull the cabinet floor if needed, and collect surface samples with swabs and tape lifts. Lab results confirm species and spore counts. We then give you a written scope for removal and repair.

Problem

Kitchen exhaust not venting properly

A clogged or improperly ducted exhaust hood pushes moisture and grease into the kitchen air. Over time, that humidity feeds mold on cabinet surfaces and behind the backsplash.

Our Fix

We check exhaust duct routing, measure airflow, and use a hygrometer to read kitchen humidity. If ventilation is the problem, we document it and recommend fixes that keep humidity below 60 percent.

Problem

Mold spreading from kitchen to other rooms

Spores travel through HVAC returns and open doorways. A small kitchen mold problem can seed growth in living rooms, bedrooms, and attics within weeks.

Our Fix

We collect air samples in the kitchen and adjacent rooms, compare spore counts to outdoor baseline, and identify the spread path. Our report tells you exactly which rooms need treatment and which are clean.

Why Boise Homeowners Book Our Kitchen Mold Checks

Why Boise Homeowners Book Our Kitchen Mold Checks

Kitchen mold rarely stays in the kitchen. It travels through wall cavities, cabinet runs, and HVAC returns. Here is what you get when you book us.

  • Find Hidden Mold Fast

    Thermal imaging and moisture meters let us read behind drywall, under cabinet bases, and inside wall cavities without tearing your kitchen apart. Most inspections take 60 to 90 minutes. You get a written report with photos, moisture percentages, and a clear recommendation the same day.

  • Lab-Verified Results

    We collect air samples with an Air-O-Cell spore trap cassette and surface samples with swabs and tape lifts. Samples go to an accredited lab, and results come back in 24 to 48 hours. You get species identification, including black mold (Stachybotrys) and toxic mold (mycotoxins), with counts you can act on.

  • Stop the Source, Not Just the Mold

    Mold comes back if the moisture stays. We trace every reading back to its source: a failed dishwasher supply line, a slow p-trap drip, a clogged exhaust duct, or a slab leak. You get a written scope showing what to fix first, so the kitchen mold removal Boise Idaho contractors perform actually holds.

  • Protect Your Family and Resale

    Mold spores in a kitchen circulate through the whole house. Catching it early keeps remediation costs down and protects your home inspection when you sell. A documented clearance report from a certified inspector carries weight with buyers, realtors, and insurance adjusters across Ada County.

Licensed, Certified, and Insured in Idaho

Licensed & Certified

  • IICRC WRT (Water Damage Restoration Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
  • IICRC AMRT (Applied Microbial Remediation Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
  • ACAC CMI (Certified Mold Inspector) — issued by American Council for Accredited Certification
  • ACAC CMR (Certified Mold Remediator) — issued by American Council for Accredited Certification
  • EPA Lead-Safe Certified — issued by U.S. Environmental Protection Agency

Verified Reviews

Google ★★★★★4.9

Fast, thorough, and honest. They found mold behind our kitchen cabinets that two other companies missed. The report was detailed and our insurance approved the claim without any back-and-forth. Highly recommend for anyone in Boise dealing with kitchen moisture.

Yelp ★★★★★5.0

Called on a Monday, had an inspector at my house Tuesday morning. He used a thermal camera and found moisture I did not know was there. Lab results came back in two days. Professional from start to finish.

BBB ★★★★★4.8

We used Boise Mold Testing for a real estate transaction in the North End. The report was clear, the inspector was on time, and the whole process was smooth. Our buyers were satisfied and we closed on schedule.

Google ★★★★★4.9

After a dishwasher leak, I was worried about mold. They came out same day, inspected the cabinet and wall, and gave me a straight answer. No upsell, no scare tactics. Just facts. I will use them again if I ever need another inspection.

Kitchen Mold Questions Boise Homeowners Ask

Real answers to the questions we hear most often from local homeowners and property managers.

How do I know if I have mold in my kitchen in Boise ID?
You likely have kitchen mold if you smell a musty or earthy odor, see dark speckling under the sink or along cabinet seams, or notice swelling and soft spots in cabinet bases. A recent dishwasher or supply-line leak is another red flag. Mold can grow within 24 to 48 hours of a water event, so if you had a leak in the last month, book an inspection.
What causes kitchen mold in Boise Idaho?
The top causes we see in Boise are slow under-sink drips, dishwasher supply line failures, refrigerator ice-maker line leaks, poor exhaust hood ventilation, and slab moisture wicking up through cabinet bases. Winter freeze-thaw cycles stress plumbing, and our dry summers followed by wet springs create ideal humidity swings. Any spot that stays above 60 percent relative humidity for 48 hours can grow mold.
How much does kitchen mold inspection cost in Boise ID?
Most kitchen mold inspections in Boise run $250 to $550 depending on the size of the kitchen and how many samples we collect. Air samples typically add $50 to $75 each, and surface samples run $40 to $60. If you need same-day kitchen mold inspection Boise ID service, there may be a small rush fee. You get a written report either way.
Can kitchen mold spread to other rooms in Boise Idaho?
Yes. Mold spores travel through air currents, HVAC returns, and open doorways. A kitchen mold problem near an HVAC return can seed mold in living rooms, bedrooms, and even attics within weeks. That is why we always recommend air sampling during a kitchen mold assessment in Boise Idaho, so we can measure spore counts room by room and confirm whether the problem has spread.

Other Mold Services We Offer in Boise

Mold Inspection

A full-property mold inspection covers every room, not just the kitchen. We check attics, crawl spaces, basements, and bathrooms for hidden growth. If your kitchen inspection turns up elevated spore counts, a whole-home inspection tells you where else to look.

View Mold Inspection

Mold Testing

Lab-based mold testing identifies species and spore counts from air and surface samples. We use it alongside kitchen inspections to confirm whether growth is active, what type it is, and whether black mold or toxic mold species are present in your Boise home.

View Mold Testing

Air Quality Testing

Air quality testing measures airborne particulates and mold spores with a particle counter and spore trap cassettes. It is the fastest way to know if your kitchen mold problem has affected the air your family breathes in adjacent rooms.

View Air Quality Testing

Black Mold Inspection

Black mold (Stachybotrys) needs a targeted inspection because it hides behind drywall and under cabinets. We use borescope cameras and lab sampling to confirm or rule it out. If found, we document it thoroughly for your remediation contractor and insurance claim.

View Black Mold Inspection

Toxic Mold Testing

Toxic mold testing checks for mycotoxin-producing species like Stachybotrys and Aspergillus. We collect air and surface samples and send them to an accredited lab. Results guide whether you need immediate remediation or can monitor the situation.

View Toxic Mold Testing

Mold Remediation

When inspection confirms mold, remediation removes it safely. We do not perform remediation ourselves, which keeps our inspection unbiased. We hand off a detailed scope to licensed remediators and return for post-remediation verification to confirm the job is done right.

View Mold Remediation

Book Your Kitchen Mold Inspection Boise ID Today

If you smell something musty, see discoloration under the sink, or had a recent leak, do not wait. Mold spreads fast. Call Boise Mold Testing now for a same-day or next-day kitchen mold inspection. We are licensed, insured, and we answer the phone.

Call Now Book Inspection Now

Contact Boise Mold Testing

Ready to schedule an inspection or have questions about mold testing? Call us at +1 866-896-8166 or email info@boisemoldtesting.com. We answer calls 24/7 for emergencies and schedule same-day appointments whenever possible. Our team serves all of Boise and Ada County, including ZIP codes 83702, 83703, 83704, 83705, 83706, and 83709.

Or call us right now at +18668968166 — we answer.

Boise Mold Testing


  • Phone

    +18668968166
  • Address

    Boise, Idaho

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Call +18668968166 Get Quote
Call Quote