Logo
Get Estimate

Crawl Space Mold Inspection Boise ID You Can Trust

Thermal imaging, air sampling, and lab results you can act on


If your floors feel soft, your house smells musty, or you have had water under the house, a crawl space mold inspection Boise ID is the fastest way to find out what is growing down there. We serve homeowners across Ada County with a full crawl space mold assessment Boise Idaho, using thermal imaging cameras and air sampling pumps to locate hidden mold before it spreads into your living space.

Senior adult inspecting a crawl space entrance during a home inspection on a sunny day.
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed Workmanship Guaranteed in Boise

What Our Crawl Space Mold Inspection Includes

Every crawl space mold inspection Boise ID we perform covers the full space, not just the obvious spots. Here is what is included in the standard service. Lab sample processing and remediation work are quoted separately based on what we find.

Full Crawl Space Walkthrough

We crawl the entire space, checking the vapor barrier, foundation walls, floor joists, subfloor, insulation, plumbing, and ductwork. Every area gets photographed and logged. Most inspections take 60 to 90 minutes depending on square footage and access.

Moisture and Thermal Mapping

A Protimeter moisture meter and a Flir thermal imaging camera map wet areas that are not visible to the eye. We log readings at multiple points so you have a documented moisture profile of the entire crawl space, not just one spot.

Air and Surface Sampling

We run an SKC air sampling pump with an Air-O-Cell spore trap cassette to capture airborne spores. Visible growth gets swab or tape lift samples. Samples go to an accredited lab, and results come back in 24 to 72 hours.

Written Report With Photos

You get a written report that includes photos, moisture readings, lab results, and a recommended scope of work. The report is written in plain language, not jargon. It is suitable for insurance claims, real estate negotiations, and contractor bids.

Remediation Scope If Needed

If mold is confirmed, we outline the remediation steps, timeline, and cost. If the problem is a moisture source, we tell you what to fix first. You get a clear next step either way, with no pressure to book additional work.

What a Crawl Space Mold Inspection Boise ID Covers


A crawl space mold inspection Boise ID is a top-to-bottom evaluation of the space under your home, not a quick visual glance with a flashlight. We check the vapor barrier, floor joists, subfloor, insulation, plumbing lines, and foundation walls for active growth, water staining, and elevated moisture. A Protimeter moisture meter and a Flir thermal imaging camera map wet areas you cannot see. We use a borescope camera to look behind insulation and into tight corners, then collect air samples with an Air-O-Cell spore trap cassette and swab or tape lift samples from any visible growth.

Boise homes deal with real crawl space moisture problems. Snowmelt in spring, irrigation lines, and aging plumbing under older North End and Depot Bench houses all push water into a space that rarely dries out on its own. When relative humidity stays above 60 percent, mold colonizes framing in as little as 48 to 72 hours. That is why we treat every crawl space moisture and mold Boise Idaho call as a two-part job: find the mold, and find the water feeding it.

How Our Crawl Space Mold Inspection Works

Every job follows the same five steps, whether you booked a same day crawl space mold inspection Boise ID or scheduled one for later in the week. Here is exactly what happens from the first call to the final report.

01

Schedule

Call or book online — a real human picks up and confirms a 2-hour arrival window.

02

Diagnose

Licensed tech inspects on-site, then walks you through the cause and your options.

03

Fix

The job is completed to code and done right the first time — no shortcuts, no surprises.

04

Guarantee

Every job backed by a written workmanship warranty — and we stand behind it.

Tools and Methods We Use

Tools & Equipment

Protimeter Moisture Meter

Measures moisture content in wood framing, subfloor, and concrete. Pin and pinless modes let us check both surface and deeper moisture without damaging materials.

Flir Thermal Imaging Camera

Reveals temperature differences caused by moisture behind insulation, inside wall cavities, and along foundation walls. Finds wet areas that are invisible to the naked eye.

Borescope Camera

Lets us look behind insulation batts, inside rim joists, and into tight cavities without tearing anything apart. Essential for confirming hidden mold behind drywall or insulation.

SKC Air Sampling Pump

Draws a calibrated volume of air through an Air-O-Cell spore trap cassette. Gives us a quantified spore count for the crawl space and living areas.

Air-O-Cell Spore Trap Cassette

Captures airborne spores for lab analysis. The standard for mold air sampling and accepted by insurance companies and real estate professionals.

Extech Hygrometer

Measures relative humidity and temperature in the crawl space. Tells us whether humidity is above the 60 percent threshold where mold thrives.

Swab and Tape Lift Kits

Collect surface samples from visible growth. Swabs work on irregular surfaces, tape lifts work on flat surfaces. Both go to the lab for species identification.

Methods & Standards

IICRC WRT and AMRT Standards

We follow IICRC Water Restoration Technician and Applied Microbial Remediation Technician standards for moisture documentation and mold assessment. These are the industry benchmarks insurance companies recognize.

ACAC CMI and CMR Protocols

Our inspectors hold ACAC Certified Mold Inspector and Certified Mold Remediator credentials. That means the inspection and any remediation follow established protocols for containment, sampling, and clearance.

EPA Lead-Safe Practices

On pre-1978 homes, we follow EPA Lead-Safe renovation rules to avoid disturbing lead paint during inspection and remediation. This matters on a lot of older Boise housing stock.

Post-Remediation Verification

After any remediation, we run air sampling and a visual inspection to confirm clearance. You get a written report documenting that the crawl space meets acceptable spore levels.

When to Schedule a Crawl Space Mold Inspection

01

You are buying a home in Boise and the general inspection flagged moisture under the house.

What we do: We perform a full crawl space mold inspection Boise ID with air and surface sampling so you know whether you are buying a mold problem or just a moisture issue. The report gives you documentation to negotiate repairs or credits.

→ You go into closing with clear lab results and a repair estimate, not a vague warning from a general inspector.

02

A pipe burst under your house over the winter and you are not sure if mold has started.

What we do: We inspect within 24 to 48 hours, map the moisture, and take air samples. If mold has started, we catch it early when remediation is still small. If it has not, we document that too.

→ You either get a clean report or a small remediation scope instead of a major rebuild.

03

Your family keeps getting sick with allergies or headaches and the doctor asked about mold exposure.

What we do: We run air quality testing with an SKC pump and Air-O-Cell cassettes to measure spore counts inside the home. If crawl space mold is affecting indoor air, the numbers show it.

→ You get lab documentation you can share with your doctor and use to justify remediation to your insurance company.

04

You had mold remediation done a year ago and want to confirm the crawl space is still clean.

What we do: We perform post-remediation verification with air sampling and a visual inspection. If clearance was never documented, we provide that report now.

→ You have a clearance report on file for resale, insurance, or your own records.

How Crawl Space Mold Inspection Runs in Boise

Boise crawl spaces deal with a specific set of conditions. Spring snowmelt from the foothills pushes water against foundations. Irrigation runoff in summer keeps soil saturated. Older homes in the North End and Depot Bench often have original plumbing that drips slowly for years before anyone notices. Newer construction in Harris Ranch and Southeast Boise sometimes has vapor barrier gaps that let ground moisture rise. We adjust our crawl space mold assessment Boise Idaho approach based on what we see in your neighborhood. A 1920s bungalow with a dirt floor needs different sampling than a 2015 build with a partial encapsulation. We also check for crawl space mold after plumbing leak Boise Idaho situations, which spike in winter when pipes freeze. Our trucks carry the full kit, so we can sample on the first visit instead of scheduling a return trip.

Neighborhoods We Serve

  • North End

    Older homes with original plumbing and minimal vapor barriers. Slow leaks are common and often go unnoticed until mold shows up on joists.

  • Boise Bench

    Mix of mid-century and newer construction. We see a lot of moisture issues from poor drainage and aging supply lines.

  • Harris Ranch

    Newer builds with partial encapsulation. Vapor barrier gaps and HVAC condensation are the most common moisture sources we find.

  • Depot Bench

    Historic homes with dirt crawl spaces. High humidity and poor ventilation drive most of the mold calls here.

  • Southeast Boise

    Irrigation runoff and high water tables in spring. We often find moisture wicking up through the foundation walls.

Local Conditions We Plan For

  • Spring snowmelt and irrigation runoff

    Water pushes against foundations from February through May. Crawl spaces that stay wet through this window are prime mold territory. We schedule extra moisture mapping during these months.

  • Winter pipe freeze events

    Burst pipes under the house are a leading cause of crawl space mold in Boise. We see a spike in calls from December through February after hard freezes.

  • Dry summer air with high indoor humidity

    Even in dry months, crawl spaces can stay humid if vapor barriers are damaged. We check humidity year-round, not just after rain.

  • Aging housing stock in older neighborhoods

    Homes built before 1980 often have original plumbing and minimal moisture control. We adjust our inspection to focus on these risk areas.

North End Bungalow With Hidden Joist Mold

Before

A 1925 bungalow had a musty smell in the hallway for months. The homeowner could not find the source. A general inspection missed it. We found active mold on floor joists near an old plumbing line, with moisture readings above 25 percent in the affected wood.

After

We documented the growth with photos and lab results, then scoped remediation. The joists were treated and the plumbing line was repaired. Post-remediation air sampling showed spore counts back to normal outdoor levels within two weeks.

Maintenance: The homeowner installed a new vapor barrier and runs a dehumidifier during spring snowmelt. Annual moisture checks keep the crawl space dry.

Before

A supply line froze and burst in January. Water ran under the house for two days before anyone noticed. The homeowner called us worried about mold. We found moisture across a 200-square-foot area and early mold growth on the subfloor.

After

We mapped the moisture, took air samples, and confirmed mold had started but had not spread far. Remediation took three days. Final air sampling showed clearance, and the homeowner filed the report with insurance.

Maintenance: We recommended pipe insulation and a freeze alarm. The homeowner also added a vapor barrier repair to prevent future moisture issues.

Before

A 2018 home had high humidity in the crawl space and a faint musty smell. The vapor barrier had gaps at the seams and around plumbing penetrations. Humidity readings were consistently above 65 percent.

After

We sealed the vapor barrier, installed a dehumidifier desiccant, and re-tested. Humidity dropped below 50 percent within a week. Follow-up air sampling confirmed no active mold growth.

Maintenance: The homeowner checks the vapor barrier twice a year and keeps the dehumidifier running from March through June. No mold has returned.

Crawl Space Problems We Solve for Boise Homes

Most crawl space mold calls come down to one of these issues. We find the source, document the damage, and give you a plan that fixes the cause instead of just the symptom.

Problem

Musty smell that will not go away

A persistent musty odor usually means active mold growth somewhere in the crawl space. Ignoring it lets spores spread into living areas and can trigger allergies, headaches, and respiratory issues over time.

Our Fix

We trace the smell to its source using thermal imaging and air sampling. Once we confirm where the mold is growing and what species it is, we recommend the right fix. Most odor problems clear up after remediation and moisture control.

Problem

Soft or bouncy floors above the crawl space

Soft floors often mean joists or subfloor have been wet long enough for mold to break down the wood. Left alone, this can lead to structural repairs that cost far more than early remediation.

Our Fix

We inspect the framing under the affected area, measure moisture content, and check for mold growth. If the wood is still structurally sound, remediation and drying save it. If not, we tell you exactly which members need replacement.

Problem

Mold after a plumbing leak or burst pipe

Water from a leak can sit under the house for weeks before anyone notices. Mold can colonize in 48 to 72 hours, and the damage often spreads further than the original leak point.

Our Fix

We map how far the moisture traveled, sample for mold, and document everything for your insurance claim. If remediation is needed, we scope it based on actual lab results, not guesswork.

Problem

High humidity that never dries out

When crawl space humidity stays above 60 percent, mold keeps coming back no matter how many times you clean it. This is common in Boise during spring snowmelt and after irrigation season.

Our Fix

We install or repair vapor barriers, recommend dehumidifier desiccants, and in severe cases scope encapsulation. Bringing humidity under control is the only permanent fix for recurring mold.

Why Boise Homeowners Book This Service

Why Boise Homeowners Book This Service

Mold under a house does not stay under the house. These are the outcomes our customers care about most when they schedule a crawl space mold inspection Boise ID.

  • Find Hidden Growth Fast

    A thermal imaging camera and borescope camera reveal mold behind insulation and inside rim joists that a visual walkthrough misses. Most inspections take 60 to 90 minutes, and you get a written report with photos so you know exactly what is growing and where.

  • Stop Airborne Spores

    Crawl space air rises into your living space through the stack effect. Air sampling with an Air-O-Cell cassette tells us whether spores like Stachybotrys or other mold are already moving upstairs. That data decides whether you need encapsulation and mold Boise ID work or just a moisture fix.

  • Protect Your Framing

    Mold digests wood. Floor joists and subfloor that stay wet can lose structural strength over a few seasons. Catching growth early during a crawl space mold assessment in Boise Idaho usually means cleaning and treating framing instead of replacing it, which saves thousands in carpentry.

  • Get a Clear Next Step

    You get lab results, moisture readings, and a plain-language plan. If remediation is needed, we scope it. If it is a plumbing drip or poor drainage, we tell you that too. No guesswork, no pressure, and no vague recommendations that leave you stuck.

Licensed, Certified, and Local

Licensed & Certified

  • IICRC WRT (Water Restoration Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
  • IICRC AMRT (Applied Microbial Remediation Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
  • ACAC CMI (Certified Mold Inspector) — issued by American Council for Accredited Certification
  • ACAC CMR (Certified Mold Remediator) — issued by American Council for Accredited Certification
  • EPA Lead-Safe Certified Firm — issued by U.S. Environmental Protection Agency

Verified Reviews

Google ★★★★★4.9

Called on a Monday about a musty smell in our Boise Bench home. They came out Tuesday morning, found mold on the joists, and had lab results back by Thursday. The report was detailed enough that our insurance covered the remediation.

Yelp ★★★★★4.8

We were buying a house in the North End and the general inspection flagged moisture. These guys did a full crawl space assessment with air sampling. Turned out to be a minor issue, but the report gave us leverage in negotiations.

BBB ★★★★★4.9

Professional, on time, and honest. They told us we did not need full remediation, just a vapor barrier repair and a dehumidifier. Saved us thousands. Will use them again for our annual moisture check.

Google ★★★★★5.0

After a pipe burst in January, we were worried about mold. They came out the next day, mapped the moisture, and took samples. Caught it early. The whole process was straightforward and the price matched the quote.

Mold Inspection Experience You Can Verify

Our inspectors carry IICRC WRT and IICRC AMRT credentials, plus ACAC CMI and ACAC CMR certifications that specifically cover mold inspection and remediation. We follow EPA Lead-Safe practices on pre-1978 homes, which matters on a lot of older Boise stock. Every technician holds OSHA 10 training and works under Idaho state mold licensing requirements. We are also NACHI certified inspectors, so we understand how moisture moves through a house and where it hides. That background is why we can tell the difference between a surface stain and active mold growth without guessing.

  • IICRC WRT and AMRT certified for water damage and mold remediation standards
  • ACAC CMI and CMR credentials covering mold inspection and remediation
  • EPA Lead-Safe certified for pre-1978 homes common in Boise neighborhoods
  • OSHA 10 trained technicians on every crawl space job
  • NACHI certified inspector with structural and moisture knowledge
Get Started Today
Mold Inspection Experience You Can Verify

Frequently Asked Questions

Real answers to the questions we hear most often from local homeowners and property managers.

How do I know if I have mold in my crawl space in Boise ID?
A musty smell in the house, soft or bouncy floors, and visible dark staining on joists are the three most common signs. If you have had a plumbing leak or standing water under the house, assume mold is growing until a crawl space mold inspection Boise ID proves otherwise. Mold can colonize wet framing in 48 to 72 hours, so do not wait weeks to check.
How much does crawl space mold inspection cost in Boise Idaho?
Most crawl space mold inspections in Boise run $250 to $650 in 2026, depending on square footage, access, and how many lab samples you need. Air sampling adds roughly $75 to $125 per sample. If you need a same day crawl space mold inspection Boise ID, expect the same range with no emergency surcharge.
Can crawl space mold affect my health in Boise ID?
Yes. Airborne spores from a crawl space rise into living areas through the stack effect, and people with allergies or asthma often notice symptoms before they see mold. Stachybotrys, sometimes called black mold, and other toxin-producing molds can trigger headaches, coughing, and sinus issues. Air sampling during a crawl space mold assessment in Boise Idaho tells you what is actually in the air.
What causes crawl space mold in Boise Idaho?
Four things cause most of it: plumbing leaks, poor drainage around the foundation, missing or damaged vapor barriers, and high humidity that never dries out. Boise snowmelt in spring and irrigation runoff make it worse. If you have had a crawl space mold after plumbing leak Boise Idaho situation, the mold is a symptom. Fix the water source and the mold stops coming back.

Related Services

Mold Inspection

A whole-house mold inspection covers the crawl space plus the attic, basement, and living areas. If your crawl space has growth, there is a good chance spores have traveled. We inspect the full envelope so you are not chasing the problem room by room.

View Mold Inspection

Mold Testing

Mold testing identifies the specific species growing in your crawl space. Knowing whether you have Cladosporium, Aspergillus, or Stachybotrys changes the remediation plan. We collect air and surface samples and send them to an accredited lab for documented results.

View Mold Testing

Air Quality Testing

Air quality testing measures spore counts inside your living space and compares them to outdoor baseline levels. If crawl space mold is affecting your indoor air, this test proves it. We use an SKC pump and Air-O-Cell cassettes for accurate counts.

View Air Quality Testing

Black Mold Inspection

Black mold, or Stachybotrys, needs constant moisture and typically shows up on cellulose materials like wood and drywall. A black mold inspection in the crawl space confirms whether the dark staining you see is actually toxic mold or just water staining.

View Black Mold Inspection

Toxic Mold Testing

Toxic mold testing looks for mycotoxin-producing species that can cause health issues. If family members are getting sick and you suspect the crawl space, this test gives you lab documentation. Results help with insurance claims and medical conversations.

View Toxic Mold Testing

Mold Remediation

When inspection confirms active growth, remediation removes it safely. We set containment, run HEPA filters, remove contaminated materials, and apply antimicrobial solutions. Every job ends with post-remediation verification so you know the crawl space is clean.

View Mold Remediation

Book Your Crawl Space Mold Inspection Boise ID Today

If you smell something musty or you have had water under the house, do not wait. We are licensed, insured, and ready to crawl. Call now and we will get a crawl space mold inspection Boise ID on the schedule, often the same day.

Call Now Schedule Inspection

Contact Boise Mold Testing

Ready to schedule an inspection or have questions about mold testing? Call us at +1 866-896-8166 or email info@boisemoldtesting.com. We answer calls 24/7 for emergencies and schedule same-day appointments whenever possible. Our team serves all of Boise and Ada County, including ZIP codes 83702, 83703, 83704, 83705, 83706, and 83709.

Or call us right now at +18668968166 — we answer.

Boise Mold Testing


  • Phone

    +18668968166
  • Address

    Boise, Idaho

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Call +18668968166 Get Quote
Call Quote